PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS27641+6A
MS27641+6A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The MS27641+6A is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-034-5257, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27641+6A
NSN: 3110-00-034-5257
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMS27641+6A
NSN3110-00-034-5257
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS27641+6A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
INNER RING WIDTH: 0.3130 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.2500 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
•
SEAL QUANTITY: 2
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SEAL TYPECONTACT
INNER RING WIDTH0.3130 INCHES NOMINAL IN
OUTER RING WIDTH0.2500 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
SEAL QUANTITY2
SPECIAL FEATURES80 PCT. FULL OF MIL-G-81322,INTERNAL RADIAL CLEARANCE 0.0004- 0.0010 IN.,HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG. F,RADIAL AND LATERAL ECCENTRICITY INNER RING 0.0010 IN. OUTER RING 0.0016 IN. IN
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
BORE DIAMETER0.3750 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
AS27641Interchangeable
interchangeable cross-reference
interchangeable
MKP20AInterchangeable
interchangeable cross-reference
interchangeable
MS27641-10Interchangeable
interchangeable cross-reference
interchangeable
561-6404325-31Interchangeable
interchangeable cross-reference
interchangeable
MS27641-12Interchangeable
interchangeable cross-reference
interchangeable
AS7949Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS27641+6A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27641+6A?
MS27641+6A is a MS27641+6A.
What parts can replace MS27641+6A?
There are 28 known substitutes for MS27641+6A: AS27641, MKP20A, MS27641-10 and 25 more. Substitute compatibility should be verified for your specific system.
Is MS27641+6A still available?
MS27641+6A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27641+6A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026