PartsTable
Technical Data Sheet
Download PDF

MS27595-022 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS27595-022: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, peripheral_diameter: 1.112 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN, center_hole_diameter: 1.006 INCHES NOMINAL IN, cross-sectional_height: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR, material_document_and_classification: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-178-6244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27595-022
NSN: 5330-01-178-6244
NIINs: 011786244, 014199006
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
peripheral_diameter1.112 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
center_hole_diameter1.006 INCHES NOMINAL IN
cross-sectional_height0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-178-6244
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS27595-022 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 3
MS27595Reference document
Same NSN cross-reference
Reference document — Identification reference
MS27595-127Reference document
Same NSN cross-reference
Reference document — Secondary reference
M009A0011-00 ITEM 10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS27595-022?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27595-022?
MS27595-022 is a RETAINER,PACKING.
What parts can replace MS27595-022?
There are 3 known substitutes for MS27595-022: MS27595, MS27595-127, M009A0011-00 ITEM 10. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27595-022?
MS27595-022 is cataloged in the U.S. Government catalog under NSN 5330-01-178-6244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27595-022

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.