PartsTable
Technical Data Sheet
Download PDF

MS27576-4-13 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS27576-4-13: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL, head_style: DISHED HEXAGON, grip_length: 0.812 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN, head_height: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-121-8902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27576-4-13
NSN: 5306-00-121-8902
FSC: 5306 — Bolts
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL
head_styleDISHED HEXAGON
grip_length0.812 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
head_height0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
thread_length0.283 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES BEARING SURFACE OF HEAD
fastener_length1.231 INCHES MINIMUM AND 1.251 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
special_featuresRETAINING ELEMENT IN SHANK
thread_directionRIGHT-HAND
NSN5306-00-121-8902
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS27576-4-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES GRIP
•
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.231 INCHES MINIMUM AND 1.251 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
THREAD LENGTH: 0.283 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
HEAD HEIGHT0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
FASTENER LENGTH1.231 INCHES MINIMUM AND 1.251 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD LENGTH0.283 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-004-7044 5306-00-007-6129 5306-00-008-7899 5306-00-009-4739 5306-00-118-7332 5306-00-151-1777 5306-00-255-4507 5306-01-101-2459
SUBSTITUTES & CROSS-REFERENCES 5
MS27576-4-13RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS194-4-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
106467-4-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
CA4510-4-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
CIPRD-MS27576-4-13RReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy MS27576-4-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27576-4-13?
MS27576-4-13 is a BOLT,CLOSE TOLERANCE.
What parts can replace MS27576-4-13?
There are 5 known substitutes for MS27576-4-13: MS27576-4-13R, AS194-4-13, 106467-4-13 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27576-4-13?
MS27576-4-13 is cataloged in the U.S. Government catalog under NSN 5306-00-121-8902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27576-4-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.