PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS27130-S101
MS27130-S101 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1108 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK, nut_length: 0.687 INCHES NOMINAL IN, nut_diameter: 0.250 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-951-3250, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27130-S101
NSN: 5310-00-951-3250
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1108 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK
nut_length0.687 INCHES NOMINAL IN
nut_diameter0.250 INCHES NOMINAL IN
thread_class3B
head_diameter0.391 INCHES NOMINAL IN
thread_seriesUNF
shank_end_typeOPEN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.190 INCHES IN
NSN5310-00-951-3250
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS27130-S101 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 32
•
HEAD COUNTERSINK ANGLE: 100.00 DEGREES NOMINAL
•
THREAD SERIES: UNF
•
SHANK END TYPE: OPEN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
MATERIAL: STEEL COMP 1108 OVERALL
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH32
HEAD COUNTERSINK ANGLE100.00 DEGREES NOMINAL
THREAD SERIESUNF
SHANK END TYPEOPEN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NOMINAL THREAD SIZE0.190 INCHES IN
MATERIALSTEEL COMP 1108 OVERALL
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
HEAD DIAMETER0.391 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
BLACKWIZARD405Interchangeable
interchangeable cross-reference
interchangeable
600 2 IN.Interchangeable
interchangeable cross-reference
interchangeable
S-10216Interchangeable
interchangeable cross-reference
interchangeable
NAS1330S3-216Interchangeable
Same NIIN cross-reference
interchangeable
NAS1330-3S216Interchangeable
Same NIIN cross-reference
interchangeable
3168727-S10-216Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS27130-S101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27130-S101?
MS27130-S101 is a NUT,PLAIN,BLIND RIVET.
What parts can replace MS27130-S101?
There are 7 known substitutes for MS27130-S101: BLACKWIZARD405, 600 2 IN., S-10216 and 4 more. Substitute compatibility should be verified for your specific system.
Is MS27130-S101 still available?
MS27130-S101 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27130-S101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026