MS27130-CR1 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS27130-CR1: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 430 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: PAN NO. 2, nut_length: 0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, head_height: 0.025 INCHES NOMINAL IN, nut_diameter: 0.151 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-01-092-0235, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS27130-CR1

NSN: 5310-01-092-0235
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	STEEL COMP 430 OVERALL
nut_style	BLIND RIVET W/SMOOTH ROUND SHANK
head_style	PAN NO. 2
nut_length	0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
head_height	0.025 INCHES NOMINAL IN
nut_diameter	0.151 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
thread_class	3B
head_diameter	0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
thread_series	UNIFIED NATIONAL COARSE (UNC)
shank_end_type	OPEN
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
NSN	5310-01-092-0235

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.025 INCHES NOMINAL IN

•

NUT LENGTH: 0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL

•

SHANK END TYPE: OPEN

•

HEAD STYLE: PAN NO. 2

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.025 INCHES NOMINAL IN
NUT LENGTH	0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES	UNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
SHANK END TYPE	OPEN
HEAD STYLE	PAN NO. 2
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.112 INCHES IN
NUT DIAMETER	0.151 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

SS4-60Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS27130-CR59KReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MS27130-CR1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS27130-CR1?

MS27130-CR1 is a NUT,PLAIN,BLIND RIVET.

What parts can replace MS27130-CR1?

There are 2 known substitutes for MS27130-CR1: SS4-60, MS27130-CR59K. Substitute compatibility should be verified for your specific system.

What is the NSN for MS27130-CR1?

MS27130-CR1 is cataloged in the U.S. Government catalog under NSN 5310-01-092-0235. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS27130-CR1 — NUT,PLAIN,BLIND RIVET

Request a Quote — MS27130-CR1