PartsTable
Technical Data Sheet
PartsTable / MRO / MS27110-4
MS27110-4 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

The MS27110-4 is a the manufacturer industrial component. Key specifications include material: COPPER CORE CONDUCTOR SINGLE CONDUCTOR, conductor_form: STRANDED SINGLE CONDUCTOR, voltage_rating: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR, precious_material: SILVER, surface_treatment: SILVER CORE CONDUCTOR SINGLE CONDUCTOR, cross-sectional_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-300-5870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MS27110-4
NSN: 6145-01-300-5870
FSC: 6145
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER CORE CONDUCTOR SINGLE CONDUCTOR
conductor_formSTRANDED SINGLE CONDUCTOR
voltage_rating600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
precious_materialSILVER
surface_treatmentSILVER CORE CONDUCTOR SINGLE CONDUCTOR
cross-sectional_shape_styleROUND
cross_section_outside_diameter0.357 INCHES NOMINAL IN
precious_material_and_locationCONDUCTOR COATING SILVER
NSN6145-01-300-5870
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: MS27110-4 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS SECTION OUTSIDE DIAMETER: 0.357 INCHES NOMINAL IN
•
SURFACE TREATMENT: SILVER CORE CONDUCTOR SINGLE CONDUCTOR
•
PRECIOUS MATERIAL AND LOCATION: CONDUCTOR COATING SILVER
•
CONDUCTOR FORM: STRANDED SINGLE CONDUCTOR
•
PRECIOUS MATERIAL: SILVER
•
MATERIAL: COPPER CORE CONDUCTOR SINGLE CONDUCTOR
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
VOLTAGE RATING: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS SECTION OUTSIDE DIAMETER0.357 INCHES NOMINAL IN
SURFACE TREATMENTSILVER CORE CONDUCTOR SINGLE CONDUCTOR
PRECIOUS MATERIAL AND LOCATIONCONDUCTOR COATING SILVER
CONDUCTOR FORMSTRANDED SINGLE CONDUCTOR
PRECIOUS MATERIALSILVER
MATERIALCOPPER CORE CONDUCTOR SINGLE CONDUCTOR
CROSS-SECTIONAL SHAPE STYLEROUND
VOLTAGE RATING600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
TEST DATA DOCUMENT81349-MIL-W-8777 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CROSS SECTION OUTSIDE DIAMETER0.357 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
20GAUpgraded Successor
successor cross-reference
successor
MILW8777Upgraded Successor
successor cross-reference
successor
L443D16Upgraded Successor
successor cross-reference
successor
RSS5-106-02Interchangeable
interchangeable cross-reference
interchangeable
MS25471-02Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-8777Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS27110-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27110-4?
MS27110-4 is a MS27110-4. It is classified as a MRO (MRO_GENERAL).
What parts can replace MS27110-4?
There are 19 known substitutes for MS27110-4: 20GA, MILW8777, L443D16 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27110-4?
MS27110-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-300-5870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27110-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026