PartsTable
Technical Data Sheet
Download PDF

MS27060-4 — ADAPTER,STRAIGHT,TUBE TO HOSE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS27060-4: ADAPTER,STRAIGHT,TUBE TO HOSE.

The ADAPTER,STRAIGHT,TUBE TO HOSE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, flow_angle: 90.0 DEGREES, leg_length: 1.540 INCHES MAXIMUM SECOND END IN, seat_angle: 37.0 DEGREES FIRST END, thread_class: 3B FIRST END, connection_style: SWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-013-6970, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27060-4
NSN: 4730-00-013-6970
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
flow_angle90.0 DEGREES
leg_length1.540 INCHES MAXIMUM SECOND END IN
seat_angle37.0 DEGREES FIRST END
thread_class3B FIRST END
connection_styleSWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END FIRST END
special_featuresGRUMMAN A10 AIRCRAFT
surface_treatmentPASSIVATE OVERALL
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.438 INCHES FIRST END IN
maximum_operating_temp450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
NSN4730-00-013-6970
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS27060-4 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FURNISHED ITEMS AND QUANTITY: 1 FLARED SLEEVE AND 1 HOSE COUPLING NUT
•
FLOW ANGLE: 90.0 DEGREES
•
CONNECTION STYLE: SWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END FIRST END
•
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED: 0.188 INCHES SECOND END IN
•
NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED: 0.312 INCHES SECOND END IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.250 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS
FURNISHED ITEMS AND QUANTITY1 FLARED SLEEVE AND 1 HOSE COUPLING NUT
FLOW ANGLE90.0 DEGREES
CONNECTION STYLESWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END FIRST END
CONNECTION STYLESWIVEL NUT (HOSE GRIPPING) SECOND END
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED0.188 INCHES SECOND END IN
NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED0.312 INCHES SECOND END IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.250 INCHES FIRST END IN
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
LEG LENGTH0.560 INCHES MINIMUM AND 0.600 INCHES MAXIMUM FIRST END IN
SUBSTITUTES & CROSS-REFERENCES 5
F6605-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
109037-21Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS27060-4CReference document
Same NSN cross-reference
Reference document — Secondary reference
Y40204-29Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS8000E110CReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS27060-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27060-4?
MS27060-4 is a ADAPTER,STRAIGHT,TUBE TO HOSE.
What parts can replace MS27060-4?
There are 5 known substitutes for MS27060-4: F6605-4, 109037-21, MS27060-4C and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27060-4?
MS27060-4 is cataloged in the U.S. Government catalog under NSN 4730-00-013-6970. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27060-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.