MS27039-4-14 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

MS27039-4-14: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, thread_length: 0.531 INCHES MINIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-082-5113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS27039-4-14

NSN: 5305-00-082-5113
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

head_style	PAN
head_height	0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
thread_length	0.531 INCHES MINIMUM IN
screw_material	STEEL
fastener_length	0.906 INCHES NOMINAL IN
hardness_rating	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.250 INCHES IN
screw_surface_treatment	CADMIUM AND CHROMATE
NSN	5305-00-082-5113

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE

•

FASTENER LENGTH: 0.906 INCHES NOMINAL IN

•

THREAD LENGTH: 0.531 INCHES MINIMUM IN

•

HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM

•

NOMINAL THREAD DIAMETER: 0.250 INCHES IN

•

HEAD STYLE: PAN

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM AND CHROMATE
FASTENER LENGTH	0.906 INCHES NOMINAL IN
THREAD LENGTH	0.531 INCHES MINIMUM IN
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER	0.250 INCHES IN
HEAD STYLE	PAN
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 4

5305PL0684439Reference document

Same NSN cross-reference

Reference document — Informative reference only

AAS2525-42Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

125C2525-42Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2011021Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy MS27039-4-14?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS27039-4-14?

MS27039-4-14 is a SCREW,MACHINE.

What parts can replace MS27039-4-14?

There are 4 known substitutes for MS27039-4-14: 5305PL0684439, AAS2525-42, 125C2525-42 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS27039-4-14?

MS27039-4-14 is cataloged in the U.S. Government catalog under NSN 5305-00-082-5113. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS27039-4-14 — SCREW,MACHINE

Request a Quote — MS27039-4-14