MS25178-8 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS25178-8: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 0.709 INCHES MINIMUM AND 0.771 INCHES MAXIMUM IN, inside_diameter_length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, material_document_and_classification: L-P-390, TYPE 1, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE, tube_outside_diameter_for_which_designed: 0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-208-1989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS25178-8

NSN: 5340-00-208-1989
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC, POLYETHYLENE (PP)
design_type	FRICTION
overall_diameter	0.709 INCHES MINIMUM AND 0.771 INCHES MAXIMUM IN
inside_diameter_length	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
material_document_and_classification	L-P-390, TYPE 1, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed	0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
NSN	5340-00-208-1989

COMPONENT DIAGRAM

KEY FEATURES

•

DESIGN TYPE: FRICTION

•

OVERALL DIAMETER: 0.709 INCHES MINIMUM AND 0.771 INCHES MAXIMUM IN

•

TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE

•

MATERIAL: PLASTIC, POLYETHYLENE (PP)

•

INSIDE DIAMETER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

DESIGN TYPE	FRICTION
OVERALL DIAMETER	0.709 INCHES MINIMUM AND 0.771 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED	0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	L-P-390, TYPE 1, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	PLASTIC, POLYETHYLENE (PP)
INSIDE DIAMETER LENGTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 5

34310513017Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

P4021569-03Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS90376-8RReference document

Same NSN cross-reference

Reference document — Secondary reference

NAS831Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

NAS831-8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS25178-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS25178-8?

MS25178-8 is a CAP,PROTECTIVE,DUST AND MOISTURE.

What parts can replace MS25178-8?

There are 5 known substitutes for MS25178-8: 34310513017, P4021569-03, MS90376-8R and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS25178-8?

MS25178-8 is cataloged in the U.S. Government catalog under NSN 5340-00-208-1989. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS25178-8 — CAP,PROTECTIVE,DUST AND MOISTURE

Request a Quote — MS25178-8