PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24700-2
MS24700-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FIXED BUSHING,SPECI is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE LOCKING INSERT, nut_diameter: 0.271 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), flange_thickness: 0.126 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-828-1304, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24700-2
NSN: 5310-00-828-1304
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE LOCKING INSERT
nut_diameter0.271 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_thickness0.126 INCHES NOMINAL IN
special_featuresSELF-LOCKING AND INCLUDES ONE SHOULDER, 0.365 IN. MIN AND 0.377 IN. MAX DIAMETER, 0.013 IN. MIN AND 0.019 IN. MAX HEIGHT IN
thread_directionRIGHT-HAND
nominal_thread_size0.138 INCHES IN
cross-sectional_shapeHEXAGONAL NUT
thread_quantity_per_inch32
flange_width_across_flats0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
NSN5310-00-828-1304
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24700-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
•
NUT DIAMETER: 0.271 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 OVERALL EXCEPT INSERT
•
CROSS-SECTIONAL SHAPE: HEXAGONAL NUT
•
THREAD QUANTITY PER INCH: 32
•
THREAD CLASS: 2B
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
NUT DIAMETER0.271 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
SPECIAL FEATURESSELF-LOCKING AND INCLUDES ONE SHOULDER, 0.365 IN. MIN AND 0.377 IN. MAX DIAMETER, 0.013 IN. MIN AND 0.019 IN. MAX HEIGHT IN
MATERIALSTEEL COMP 302 OVERALL EXCEPT INSERT
CROSS-SECTIONAL SHAPEHEXAGONAL NUT
THREAD QUANTITY PER INCH32
THREAD CLASS2B
NOMINAL THREAD SIZE0.138 INCHES IN
FLANGE THICKNESS0.126 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MILC26518Interchangeable
interchangeable cross-reference
interchangeable
217-25R-A077PInterchangeable
interchangeable cross-reference
interchangeable
358-4000-120Interchangeable
interchangeable cross-reference
interchangeable
MS24286RB3Interchangeable
interchangeable cross-reference
interchangeable
217-33R-B018P-10Interchangeable
interchangeable cross-reference
interchangeable
10-815015-10SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24700-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24700-2?
MS24700-2 is a FIXED BUSHING,SPECI.
What parts can replace MS24700-2?
There are 18 known substitutes for MS24700-2: MILC26518, 217-25R-A077P, 358-4000-120 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24700-2?
MS24700-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-828-1304. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24700-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026