PartsTable
Technical Data Sheet
Download PDF

MS24694S103 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS24694S103: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.531 INCHES NOMINAL IN, screw_material: STEEL COMP 8740 OR STEEL COMP 8630, fastener_length: 1.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-059-3086, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24694S103
NSN: 5305-00-059-3086
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.531 INCHES NOMINAL IN
screw_materialSTEEL COMP 8740 OR STEEL COMP 8630
fastener_length1.031 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength125000 POUNDS PER SQUARE INCH LBS
NSN5305-00-059-3086
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24694S103 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 1.031 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.531 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 8740 OR STEEL COMP 8630
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH1.031 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH0.531 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8740 OR STEEL COMP 8630
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 4
AN509-416-16Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2L6011-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
410076Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5305PL0144223Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS24694S103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24694S103?
MS24694S103 is a SCREW,MACHINE.
What parts can replace MS24694S103?
There are 4 known substitutes for MS24694S103: AN509-416-16, 2L6011-1, 410076 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24694S103?
MS24694S103 is cataloged in the U.S. Government catalog under NSN 5305-00-059-3086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24694S103

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.