PartsTable
Technical Data Sheet
Download PDF

MS24694-S5 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS24694-S5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.283 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.329 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, screw_material: STEEL COMP 8630 OR STEEL COMP 4037, fastener_length: 0.516 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-057-0491, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24694-S5
NSN: 5305-00-057-0491
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.283 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.329 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
screw_materialSTEEL COMP 8630 OR STEEL COMP 4037
fastener_length0.516 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationMRAP- COUGAR AMBULANCE
nominal_thread_diameter0.164 INCHES IN
NSN5305-00-057-0491
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24694-S5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.329 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.516 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
THREAD LENGTH0.329 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8630 OR STEEL COMP 4037
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 4
MILS7839Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305PL0144201Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN509-8R8Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN509-8R8REV2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS24694-S5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24694-S5?
MS24694-S5 is a SCREW,MACHINE.
What parts can replace MS24694-S5?
There are 4 known substitutes for MS24694-S5: MILS7839, 5305PL0144201, AN509-8R8 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24694-S5?
MS24694-S5 is cataloged in the U.S. Government catalog under NSN 5305-00-057-0491. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24694-S5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.