PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24693-269
MS24693-269 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-558-5084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24693-269
NSN: 5305-01-558-5084
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
special_featuresSCREW SHALL HAVE PLAIN SHEARED END
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
NSN5305-01-558-5084
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24693-269 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
SCREW MATERIALSTEEL CORROSION RESISTING
NOMINAL THREAD DIAMETER0.190 INCHES IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESSCREW SHALL HAVE PLAIN SHEARED END
HEAD STYLEFLAT COUNTERSUNK
THREAD LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5305007815662Interchangeable
interchangeable cross-reference
interchangeable
MS24693C269Interchangeable
interchangeable cross-reference
interchangeable
5000 346302Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24693-269?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24693-269?
MS24693-269 is a SCREW,MACHINE.
What parts can replace MS24693-269?
There are 3 known substitutes for MS24693-269: 5305007815662, MS24693C269, 5000 346302. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24693-269?
MS24693-269 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-558-5084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24693-269

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026