PartsTable
Technical Data Sheet
Download PDF

MS24692-500P — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS24692-500P: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: OVAL, surface_treatment: CADMIUM AND CHROMATE OVERALL, first_end_location: BOTH ENDS, pin_overall_length: 6.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-019-5710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24692-500P
NSN: 5315-01-019-5710
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleOVAL
surface_treatmentCADMIUM AND CHROMATE OVERALL
first_end_locationBOTH ENDS
pin_overall_length6.000 INCHES NOMINAL IN
pin_size_designation10
special_test_featuresSPECIAL QUALITY CONTROL TESTING
first_end_outer_radius0.706 INCHES NOMINAL IN
departure_from_cited_documentAS MOD BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-019-5710
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24692-500P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END LOCATION: BOTH ENDS
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
FIRST END STYLE: OVAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 6.000 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
DEPARTURE FROM CITED DOCUMENT: AS MOD BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
FIRST END LOCATIONBOTH ENDS
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
FIRST END STYLEOVAL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH6.000 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
DEPARTURE FROM CITED DOCUMENTAS MOD BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
PIN SIZE DESIGNATION10
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
000991913-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NASM24692Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS24692-500P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24692-500P?
MS24692-500P is a PIN,TAPERED,PLAIN.
What parts can replace MS24692-500P?
There are 2 known substitutes for MS24692-500P: 000991913-000, NASM24692. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24692-500P?
MS24692-500P is cataloged in the U.S. Government catalog under NSN 5315-01-019-5710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24692-500P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.