PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24692-4
MS24692-4 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, surface_finish: 63.0 MICROINCHES OVERALL, first_end_style: OVAL, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: CADMIUM OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-198-6103, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24692-4
NSN: 5315-00-198-6103
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish63.0 MICROINCHES OVERALL
first_end_styleOVAL
hardness_rating25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentCADMIUM OVERALL
first_end_locationBOTH ENDS
pin_overall_length0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
pin_size_designation7/0
first_end_outer_radius0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-198-6103
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24692-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
PIN SIZE DESIGNATION: 7/0
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
•
PIN OVERALL LENGTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END OUTER RADIUS: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END LOCATIONBOTH ENDS
PIN SIZE DESIGNATION7/0
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
PIN OVERALL LENGTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END OUTER RADIUS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE FINISH63.0 MICROINCHES OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
F114-50-7Interchangeable
interchangeable cross-reference
interchangeable
MILP16610Interchangeable
interchangeable cross-reference
interchangeable
202753Interchangeable
interchangeable cross-reference
interchangeable
404-61Interchangeable
interchangeable cross-reference
interchangeable
MS24692-180Interchangeable
interchangeable cross-reference
interchangeable
2431180-22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24692-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24692-4?
MS24692-4 is a PIN,TAPERED,PLAIN.
What parts can replace MS24692-4?
There are 13 known substitutes for MS24692-4: F114-50-7, MILP16610, 202753 and 10 more. Substitute compatibility should be verified for your specific system.
Is MS24692-4 still available?
MS24692-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24692-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026