PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24692-373P
MS24692-373P ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, first_end_style: OVAL, surface_treatment: CADMIUM OVERALL, first_end_location: BOTH ENDS, pin_overall_length: 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM IN, first_end_outer_radius: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-005-5828, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24692-373P
NSN: 5315-00-005-5828
FSC: 5315
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleOVAL
surface_treatmentCADMIUM OVERALL
first_end_locationBOTH ENDS
pin_overall_length2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM IN
pin_size_designation7
first_end_outer_radius0.750 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-005-5828
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24692-373P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN SIZE DESIGNATION: 7
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT: CADMIUM OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM IN
•
FIRST END STYLE: OVAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
PIN SIZE DESIGNATION7
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM IN
FIRST END STYLEOVAL
FIRST END OUTER RADIUS0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
NASM24692Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24692-373P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24692-373P?
MS24692-373P is a PIN,TAPERED,PLAIN.
What parts can replace MS24692-373P?
There is 1 known substitute for MS24692-373P: NASM24692. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24692-373P?
MS24692-373P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-005-5828. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24692-373P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026