PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24692-260
MS24692-260 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, surface_finish: 125.0 MICROINCHES BOTH ENDS, first_end_style: OVAL, first_end_location: BOTH ENDS, pin_overall_length: 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN, first_end_outer_radius: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-062-4408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24692-260
NSN: 5315-00-062-4408
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish125.0 MICROINCHES BOTH ENDS
first_end_styleOVAL
first_end_locationBOTH ENDS
pin_overall_length1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
pin_size_designation3
first_end_outer_radius0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-062-4408
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24692-260 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: OVAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE FINISH: 63.0 MICROINCHES SHANK END
•
FIRST END LOCATION: BOTH ENDS
•
PIN SIZE DESIGNATION: 3
•
PIN OVERALL LENGTH: 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END OUTER RADIUS: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLEOVAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE FINISH63.0 MICROINCHES SHANK END
FIRST END LOCATIONBOTH ENDS
PIN SIZE DESIGNATION3
PIN OVERALL LENGTH1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END OUTER RADIUS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE FINISH125.0 MICROINCHES BOTH ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
NASM16610Interchangeable
interchangeable cross-reference
interchangeable
MILP16610Interchangeable
interchangeable cross-reference
interchangeable
103586Interchangeable
interchangeable cross-reference
interchangeable
5078Interchangeable
interchangeable cross-reference
interchangeable
AN385-2-12Interchangeable
interchangeable cross-reference
interchangeable
117133Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24692-260?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24692-260?
MS24692-260 is a PIN,TAPERED,PLAIN.
What parts can replace MS24692-260?
There are 10 known substitutes for MS24692-260: NASM16610, MILP16610, 103586 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24692-260?
MS24692-260 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-062-4408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24692-260

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026