PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24692-100
MS24692-100 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, first_end_style: OVAL, first_end_location: BOTH ENDS, pin_overall_length: 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN, first_end_outer_radius: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, material_document_and_classification: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-188-0162, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24692-100
NSN: 5315-00-188-0162
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleOVAL
first_end_locationBOTH ENDS
pin_overall_length0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
first_end_outer_radius0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-188-0162
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24692-100 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
MATERIAL: STEEL OVERALL
•
FIRST END OUTER RADIUS: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END STYLE: OVAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
MATERIALSTEEL OVERALL
FIRST END OUTER RADIUS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END STYLEOVAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
9-049-100058Interchangeable
interchangeable cross-reference
interchangeable
117913Interchangeable
interchangeable cross-reference
interchangeable
542-7626-002Interchangeable
interchangeable cross-reference
interchangeable
101331Interchangeable
interchangeable cross-reference
interchangeable
101331 FIND NO 36Interchangeable
interchangeable cross-reference
interchangeable
NASM24692Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24692-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24692-100?
MS24692-100 is a PIN,TAPERED,PLAIN.
What parts can replace MS24692-100?
There are 6 known substitutes for MS24692-100: 9-049-100058, 117913, 542-7626-002 and 3 more. Substitute compatibility should be verified for your specific system.
Is MS24692-100 still available?
MS24692-100 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24692-100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026