PartsTable
Technical Data Sheet
Download PDF

MS24692-1 — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS24692-1: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, surface_finish: 32.0 MICROINCHES OVERALL, first_end_style: OVAL, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: CADMIUM OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-198-6101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24692-1
NSN: 5315-00-198-6101
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish32.0 MICROINCHES OVERALL
first_end_styleOVAL
hardness_rating25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentCADMIUM OVERALL
first_end_locationBOTH ENDS
pin_overall_length0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
pin_size_designation7/0
first_end_outer_radius0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-198-6101
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24692-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES OVERALL
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: OVAL
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
•
PIN OVERALL LENGTH: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN SIZE DESIGNATION: 7/0
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES OVERALL
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLEOVAL
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
PIN OVERALL LENGTH0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SIZE DESIGNATION7/0
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
AN385-70-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
104A902283Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
NASM24692Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS24692-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24692-1?
MS24692-1 is a PIN,TAPERED,PLAIN.
What parts can replace MS24692-1?
There are 3 known substitutes for MS24692-1: AN385-70-3, 104A902283, NASM24692. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24692-1?
MS24692-1 is cataloged in the U.S. Government catalog under NSN 5315-00-198-6101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24692-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.