PartsTable
Technical Data Sheet
Download PDF

MS24677-64C — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS24677-64C: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-281-3158, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24677-64C
NSN: 5305-00-281-3158
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleFLAT CHAMFER
head_height0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
hole_diameter0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
hole_quantity3
thread_length0.595 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
fastener_length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5305-00-281-3158
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24677-64C · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.3125 INCHES MINIMUM AND 0.3160 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.595 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
HOLE CONFIGURATION STYLE: ROUND INTERNAL HEXAGON
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.3125 INCHES MINIMUM AND 0.3160 INCHES MAXIMUM IN
HEAD HEIGHT0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FASTENER LENGTH0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.595 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEROUND INTERNAL HEXAGON
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 7
MS245677-64Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS24677-64Reference document
Same NSN cross-reference
Reference document — Secondary reference
WG139559Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
E108609 FIND 234Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FF-S-86Reference document
Same NSN cross-reference
Reference document — Identification reference
3176207-B-157Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS24677-64C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24677-64C?
MS24677-64C is a SCREW,CAP,SOCKET HEAD.
What parts can replace MS24677-64C?
There are 7 known substitutes for MS24677-64C: MS245677-64, MS24677-64, WG139559 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24677-64C?
MS24677-64C is cataloged in the U.S. Government catalog under NSN 5305-00-281-3158. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24677-64C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.