PartsTable
Technical Data Sheet
Download PDF

MS24667-30BL — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS24667-30BL: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL FASTENER, head_style: FLAT COUNTERSUNK, head_height: 0.161 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, thread_length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-735-6682, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24667-30BL
NSN: 5305-01-735-6682
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL FASTENER
head_styleFLAT COUNTERSUNK
head_height0.161 INCHES NOMINAL IN
thread_class3A A
head_diameter0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
thread_length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
fastener_length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
locking_featurePATCH OR STRIP LOCKING FEATURE
special_featuresTENSILE STRENGTH IS 4750 LBF MIN;SELF-LOCKING ELEMENT SHALL BE A PATCH TYPE OR LONGITUDINAL STRIP IN ACCORDANCE WITH MIL-DTL-18240
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
surface_treatmentBLACK CHEMICAL FINISH FASTENER
NSN5305-01-735-6682
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24667-30BL · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.161 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-DTL-13924, CLASS 1 OR MIL-DTL-16232, TYPE M, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
•
THREAD LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
HEAD HEIGHT0.161 INCHES NOMINAL IN
FASTENER LENGTH0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-DTL-13924, CLASS 1 OR MIL-DTL-16232, TYPE M, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD LENGTH0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONFF-S-86 FED SPEC SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS-24667 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SUBSTITUTES & CROSS-REFERENCES 3
H453-1111-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
141-8617681-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NASM24667Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS24667-30BL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24667-30BL?
MS24667-30BL is a SCREW,CAP,SOCKET HEAD.
What parts can replace MS24667-30BL?
There are 3 known substitutes for MS24667-30BL: H453-1111-13, 141-8617681-13, NASM24667. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24667-30BL?
MS24667-30BL is cataloged in the U.S. Government catalog under NSN 5305-01-735-6682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24667-30BL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.