PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24665153
MS24665153 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, point_type: EXTENDED PRONG SQUARE CUT, hardness_rating: 65.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 78.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL, style_designator: STANDARD, underloop_length: 0.688 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-185-0037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24665153
NSN: 5315-00-185-0037
FSC: 5315
CAGE: 11815 — SPS TECHNOLOGIES, LLC DBA CHERRY AEROSPACE DIV DIV CHERRY AEROSPACE (USA)
SPECIFICATIONS
diameter0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
point_typeEXTENDED PRONG SQUARE CUT
hardness_rating65.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 78.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
style_designatorSTANDARD
underloop_length0.688 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
end_item_identificationMRAP RG-33 AND RG-33 AUV; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
material_document_and_classificationASTM A493 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-185-0037
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24665153 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
NONDEFINITIVE SPEC/STD DATA: C TYPE
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OVERALL
•
DEPARTURE FROM CITED DESIGNATOR: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
NONDEFINITIVE SPEC/STD DATAC TYPE
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OVERALL
DEPARTURE FROM CITED DESIGNATORAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A493 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
04052333010290Interchangeable
interchangeable cross-reference
interchangeable
188736Interchangeable
interchangeable cross-reference
interchangeable
MS24665-153Interchangeable
interchangeable cross-reference
interchangeable
10353714Interchangeable
Same NIIN cross-reference
interchangeable
5315PL1730314Interchangeable
Same NIIN cross-reference
interchangeable
0740710Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24665153?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24665153?
MS24665153 is a PIN,COTTER.
What parts can replace MS24665153?
There are 7 known substitutes for MS24665153: 04052333010290, 188736, MS24665-153 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24665153?
MS24665153 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-185-0037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24665153

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026