PartsTable
Technical Data Sheet
Download PDF

MS24665-377 — PIN,COTTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS24665-377: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, point_type: EXTENDED PRONG SQUARE CUT, hardness_rating: 55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL, style_designator: STANDARD, underloop_length: 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-236-8363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24665-377
NSN: 5315-00-236-8363
NIINs: 002368363, 002857161, 016410254
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A0126 — LEONARDO SPA HELICOPTERS DIVISION - PRODUCTION SITE (ITA)
SPECIFICATIONS
diameter0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
point_typeEXTENDED PRONG SQUARE CUT
hardness_rating55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
style_designatorSTANDARD
underloop_length1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
end_item_identificationMRAP BUFFALO MK2A2
material_document_and_classificationASTM A493 ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-236-8363
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24665-377 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
DIAMETER: 0.125 INCHES NOMINAL IN
•
UNDERLOOP LENGTH: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTANDARD
DIAMETER0.125 INCHES NOMINAL IN
UNDERLOOP LENGTH2.000 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
68277Reference document
Same NSN cross-reference
Reference document — Secondary reference
36343N3Reference document
Same NSN cross-reference
Reference document — Secondary reference
5315PL1939968Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN381-4-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy MS24665-377?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24665-377?
MS24665-377 is a PIN,COTTER.
What parts can replace MS24665-377?
There are 4 known substitutes for MS24665-377: 68277, 36343N3, 5315PL1939968 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24665-377?
MS24665-377 is cataloged in the U.S. Government catalog under NSN 5315-00-236-8363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24665-377