PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24665-285
MS24665-285 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: EXTENDED PRONG SQUARE CUT, overall_width: 0.043 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN, hardness_rating: 60.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 70.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL, style_designator: FLAT, underloop_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-816-1794, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24665-285
NSN: 5315-00-816-1794
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeEXTENDED PRONG SQUARE CUT
overall_width0.043 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
hardness_rating60.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 70.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
style_designatorFLAT
underloop_length1.000 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-816-1794
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24665-285 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: STANDARD
•
POINT TYPE: EXTENDED PRONG SQUARE CUT
•
DIAMETER: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORSTANDARD
END ITEM IDENTIFICATIONW/S: BOILERS, 1200PSI; L.P. COMPRESSORS; TORPEDO, MK 48; AIRCRAFT, EAGLE F-15; SUPPORT EQUIPMENT, B-1 AIRCRAFT; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); FIRE PUMPS; SUPPORT EQUIPMENT, B-52 AIRCRAFT; AIRCRAFT, THUNDERBOLT II, A-10; CHILLED WATER A/S SYSTEMS
POINT TYPEEXTENDED PRONG SQUARE CUT
DIAMETER0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
UNDERLOOP LENGTH0.938 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
137171Interchangeable
interchangeable cross-reference
interchangeable
103374Interchangeable
interchangeable cross-reference
interchangeable
115X33RInterchangeable
interchangeable cross-reference
interchangeable
70642Interchangeable
interchangeable cross-reference
interchangeable
PEI 5528Interchangeable
interchangeable cross-reference
interchangeable
69-735Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24665-285?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24665-285?
MS24665-285 is a PIN,COTTER.
What parts can replace MS24665-285?
There are 22 known substitutes for MS24665-285: 137171, 103374, 115X33R and 19 more. Substitute compatibility should be verified for your specific system.
Is MS24665-285 still available?
MS24665-285 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24665-285

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026