PartsTable
Technical Data Sheet
Download PDF

MS24630-2 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS24630-2: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OR STEEL COMP 420 OVERALL, head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, fastener_length: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-959-1086, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24630-2
NSN: 5305-00-959-1086
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OR STEEL COMP 420 OVERALL
head_stylePAN
head_height0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleTHRU SLOT (TYPE D) OR DOUBLE FLUTE (TYPE F) OR WIDE FLUTE (TYPE T) OR THRU SLOT (TYPE 6)
nonmachine_nominal_thread_diameter0.086 INCHES IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
NSN5305-00-959-1086
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24630-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: THRU SLOT (TYPE D) OR DOUBLE FLUTE (TYPE F) OR WIDE FLUTE (TYPE T) OR THRU SLOT (TYPE 6)
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
HEAD STYLE: PAN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD HEIGHT0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NONMACHINE THREAD STYLETHRU SLOT (TYPE D) OR DOUBLE FLUTE (TYPE F) OR WIDE FLUTE (TYPE T) OR THRU SLOT (TYPE 6)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
HEAD STYLEPAN
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIALSTEEL COMP 410 OR STEEL COMP 420 OVERALL
HEAD DIAMETER0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
5305009591086Reference document
Same NSN cross-reference
Reference document — Secondary reference
10114750Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS24630-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24630-2?
MS24630-2 is a SCREW,TAPPING.
What parts can replace MS24630-2?
There are 2 known substitutes for MS24630-2: 5305009591086, 10114750. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24630-2?
MS24630-2 is cataloged in the U.S. Government catalog under NSN 5305-00-959-1086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24630-2