MS24622-9 — SCREW,TAPPING

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

MS24622-9: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OR STEEL COMP 420 OVERALL, head_style: PAN, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-058-2100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS24622-9

NSN: 5305-00-058-2100
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	STEEL COMP 410 OR STEEL COMP 420 OVERALL
head_style	PAN
head_height	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
head_diameter	0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
fastener_length	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
surface_treatment	PASSIVATE OVERALL
internal_drive_style	CROSS RECESS TYPE 1
nonmachine_thread_style	DOG TYPE (TYPE B OR C)
nonmachine_nominal_thread_diameter	0.112 INCHES IN
material_document_and_classification	66 FED STD ALL MATERIAL RESPONSES OVERALL
NSN	5305-00-058-2100

COMPONENT DIAGRAM

KEY FEATURES

•

NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES IN

•

HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

NONMACHINE THREAD STYLE: DOG TYPE (TYPE B OR C)

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL

•

HEAD STYLE: PAN

•

SURFACE TREATMENT: PASSIVATE OVERALL

•

INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1

TECHNICAL CHARACTERISTICS

NONMACHINE NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD HEIGHT	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FASTENER LENGTH	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NONMACHINE THREAD STYLE	DOG TYPE (TYPE B OR C)
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
HEAD STYLE	PAN
SURFACE TREATMENT	PASSIVATE OVERALL
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL	STEEL COMP 410 OR STEEL COMP 420 OVERALL
HEAD DIAMETER	0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 3

1402-486Reference document

Same NSN cross-reference

Reference document — Secondary reference

61585000Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

701002-615Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MS24622-9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS24622-9?

MS24622-9 is a SCREW,TAPPING.

What parts can replace MS24622-9?

There are 3 known substitutes for MS24622-9: 1402-486, 61585000, 701002-615. Substitute compatibility should be verified for your specific system.

What is the NSN for MS24622-9?

MS24622-9 is cataloged in the U.S. Government catalog under NSN 5305-00-058-2100. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS24622-9 — SCREW,TAPPING

Request a Quote — MS24622-9