PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24621-36
MS24621-36 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN, head_height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, fastener_length: 1.453 INCHES MINIMUM AND 1.547 INCHES MAXIMUM IN, features_provided: CASEHARDENED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-472-5252, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24621-36
NSN: 5305-00-472-5252
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN
head_height0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
fastener_length1.453 INCHES MINIMUM AND 1.547 INCHES MAXIMUM IN
features_providedCASEHARDENED
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_dataAB TYPE
nonmachine_nominal_thread_diameter0.164 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
NSN5305-00-472-5252
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24621-36 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: AB TYPE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
•
FEATURES PROVIDED: CASEHARDENED
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAAB TYPE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD DIAMETER0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
42128Interchangeable
interchangeable cross-reference
interchangeable
LAF9155Interchangeable
interchangeable cross-reference
interchangeable
PMA-10-9155Interchangeable
interchangeable cross-reference
interchangeable
J514Interchangeable
interchangeable cross-reference
interchangeable
8-12-140130CAInterchangeable
interchangeable cross-reference
interchangeable
SAE-J514-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24621-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24621-36?
MS24621-36 is a SCREW,TAPPING.
What parts can replace MS24621-36?
There are 11 known substitutes for MS24621-36: 42128, LAF9155, PMA-10-9155 and 8 more. Substitute compatibility should be verified for your specific system.
Is MS24621-36 still available?
MS24621-36 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24621-36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026