PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24619-25
MS24619-25 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, features_provided: CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-052-9971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24619-25
NSN: 5305-00-052-9971
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
features_providedCASEHARDENED
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleDOG TYPE (TYPE B OR C)
nonmachine_nominal_thread_diameter0.164 INCHES IN
material_document_and_classificationAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5305-00-052-9971
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24619-25 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
•
FEATURES PROVIDED: CASEHARDENED
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
HEAD HEIGHT0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
FEATURES PROVIDEDCASEHARDENED
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
MS51862-26Interchangeable
interchangeable cross-reference
interchangeable
161422Interchangeable
interchangeable cross-reference
interchangeable
FFS107Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24619-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24619-25?
MS24619-25 is a SCREW,TAPPING.
What parts can replace MS24619-25?
There are 3 known substitutes for MS24619-25: MS51862-26, 161422, FFS107. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24619-25?
MS24619-25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-052-9971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24619-25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026