PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24617-33

MS24617-33 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, features_provided: CASEHARDENED, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System under NSN 5305-00-432-4203, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24617-33
NSN: 5305-00-432-4203
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1030 OVERALL
head_stylePAN
head_height0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
head_diameter0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
features_providedCASEHARDENED
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.190 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
NSN5305-00-432-4203
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24617-33 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
FEATURES PROVIDED: CASEHARDENED
•
NONDEFINITIVE SPEC/STD DATA: AB TYPE
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
NONDEFINITIVE SPEC/STD DATAAB TYPE
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
MS24621-45InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2540001444999InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3489715InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
42134InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
23034InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
T-100-SMInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24617-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24617-33?
MS24617-33 is a SCREW,TAPPING.
What parts can replace MS24617-33?
There are 21 known substitutes for MS24617-33: MS24621-45, 2540001444999, 3489715 and 18 more. Substitute compatibility should be verified for your specific system.
Is MS24617-33 still available?
MS24617-33 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24617-33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026