PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24615-42
MS24615-42 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, fastener_length: 1.453 INCHES MINIMUM AND 1.547 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-483-0552, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24615-42
NSN: 5305-00-483-0552
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
fastener_length1.453 INCHES MINIMUM AND 1.547 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.190 INCHES IN
NSN5305-00-483-0552
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24615-42 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD STYLE: FLAT COUNTERSUNK
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.547 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
FASTENER LENGTH1.453 INCHES MINIMUM AND 1.547 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
42338Interchangeable
interchangeable cross-reference
interchangeable
4057094Interchangeable
interchangeable cross-reference
interchangeable
2151Interchangeable
interchangeable cross-reference
interchangeable
38689Interchangeable
interchangeable cross-reference
interchangeable
MS51862-40Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24615-42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24615-42?
MS24615-42 is a SCREW,TAPPING.
What parts can replace MS24615-42?
There are 5 known substitutes for MS24615-42: 42338, 4057094, 2151 and 2 more. Substitute compatibility should be verified for your specific system.
Is MS24615-42 still available?
MS24615-42 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24615-42

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026