MS24586 — SPRING,HELICAL,EXTENSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MS24586: SPRING,HELICAL,EXTENSION.

The SPRING,HELICAL,EXTENSION is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, end_style: SHORT TWISTED HOOK BOTH ENDS, design_type: CLOSED, hook_radius: 0.125 INCHES NOMINAL BOTH ENDS IN, coil_quantity: 53-1/2, inside_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-147-8062, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS24586

NSN: 5360-00-147-8062
NIINs: 001478062, 005261700, 014705685
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
end_style	SHORT TWISTED HOOK BOTH ENDS
design_type	CLOSED
hook_radius	0.125 INCHES NOMINAL BOTH ENDS IN
coil_quantity	53-1/2
inside_diameter	0.250 INCHES NOMINAL IN
style_designator	CYLINDRICAL
surface_treatment	PASSIVATE OVERALL
spring_free_length	3.000 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND
spring_deflection_rate	3.680 POUNDS PER INCH NOMINAL LBS
coil_to_hook_inside_length	0.023 INCHES NOMINAL BOTH ENDS IN
NSN	5360-00-147-8062

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN

•

LOAD RATING: 2.749 POUNDS MAXIMUM LBS

•

END STYLE: SHORT TWISTED HOOK BOTH ENDS

•

DESIGN TYPE: CLOSED

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423,COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING DEFLECTION RATE: 2.566 POUNDS PER INCH NOMINAL LBS

•

INSIDE DIAMETER: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
LOAD RATING	2.749 POUNDS MAXIMUM LBS
END STYLE	SHORT TWISTED HOOK BOTH ENDS
DESIGN TYPE	CLOSED
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423,COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING DEFLECTION RATE	2.566 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
STOCK DIAMETER	0.026 INCHES NOMINAL IN
SPRING LENGTH UNDER LOAD	1.970 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

SAE-AS13572Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS24586C37Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS24586?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS24586?

MS24586 is a SPRING,HELICAL,EXTENSION.

What parts can replace MS24586?

There are 2 known substitutes for MS24586: SAE-AS13572, MS24586C37. Substitute compatibility should be verified for your specific system.

What is the NSN for MS24586?

MS24586 is cataloged in the U.S. Government catalog under NSN 5360-00-147-8062. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS24586 — SPRING,HELICAL,EXTENSION

Request a Quote — MS24586