PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24466-6
MS24466-6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3743 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, outer_ring_width: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2979, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24466-6
NSN: 3110-00-227-2979
FSC: 3110
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3743 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
outer_ring_width0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
special_featuresOIL HOLE AND GROOVE IN INNER RING
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCHROMIUM OUTER RING
lubrication_materialGREASE
overall_outside_diameter1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2979
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS24466-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OUTER RING WIDTH: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
ALIGNMENT TYPE: RIGID
•
INNER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OUTER RING WIDTH0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
ALIGNMENT TYPERIGID
INNER RING WIDTH0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER RING
LUBRICATION MATERIALGREASE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
481567-1Interchangeable
interchangeable cross-reference
interchangeable
5036Interchangeable
interchangeable cross-reference
interchangeable
050369Interchangeable
interchangeable cross-reference
interchangeable
SP32163Interchangeable
interchangeable cross-reference
interchangeable
419542-2Interchangeable
interchangeable cross-reference
interchangeable
GB2717-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24466-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24466-6?
MS24466-6 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS24466-6?
There are 23 known substitutes for MS24466-6: 481567-1, 5036, 050369 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24466-6?
MS24466-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2979. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24466-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026