PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24465-20
MS24465-20 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL COMP 4620 OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 1.2500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 1.2500 INCHES NOMINAL IN, outer_ring_width: 1.0490 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-503-5623, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24465-20
NSN: 3110-00-503-5623
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL COMP 4620 OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter1.2500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width1.2500 INCHES NOMINAL IN
outer_ring_width1.0490 INCHES NOMINAL IN
special_features4 OIL HOLES AND GROOVE IN INNER RING
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCHROMIUM OUTER RACE
lubrication_materialGREASE
overall_outside_diameter2.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-503-5623
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS24465-20 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
INNER RING WIDTH: 1.2500 INCHES NOMINAL IN
•
OUTER RING WIDTH: 1.0490 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SPECIAL FEATURES4 OIL HOLES AND GROOVE IN INNER RING
ALIGNMENT TYPERIGID
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
INNER RING WIDTH1.2500 INCHES NOMINAL IN
OUTER RING WIDTH1.0490 INCHES NOMINAL IN
SURFACE TREATMENTCHROMIUM OUTER RACE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-633 FED SPEC 5TH MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
4NBC612ZPANG25Interchangeable
interchangeable cross-reference
interchangeable
505-4Interchangeable
IBM Flex System FC5054 4-Port FC-16GB Adapter
interchangeable
A2471Interchangeable
interchangeable cross-reference
interchangeable
24465-10Interchangeable
interchangeable cross-reference
interchangeable
MS24465-10Interchangeable
interchangeable cross-reference
interchangeable
NAS502-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24465-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24465-20?
MS24465-20 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS24465-20?
There are 26 known substitutes for MS24465-20: 4NBC612ZPANG25, 505-4, A2471 and 23 more. Substitute compatibility should be verified for your specific system.
Is MS24465-20 still available?
MS24465-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24465-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026