PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24463-3
MS24463-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, alignment_type: SELF-ALIGNING, special_features: OIL HOLE AND GROOVE IN OUTER RING, features_provided: ALIGNING RING, surface_treatment: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES, lubrication_material: GREASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2863, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24463-3
NSN: 3110-00-227-2863
FSC: 3110
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
alignment_typeSELF-ALIGNING
special_featuresOIL HOLE AND GROOVE IN OUTER RING
features_providedALIGNING RING
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
lubrication_material_document_and_classificationMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-227-2863
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS24463-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
LUBRICATION MATERIAL: GREASE
•
FEATURES PROVIDED: ALIGNING RING
•
ALIGNMENT TYPE: SELF-ALIGNING
•
MATERIAL: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
LUBRICATION MATERIALGREASE
FEATURES PROVIDEDALIGNING RING
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER RING
ALIGNMENT TYPESELF-ALIGNING
MATERIALSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
BACB10CE5Interchangeable
interchangeable cross-reference
interchangeable
5NBE717ZP2CInterchangeable
interchangeable cross-reference
interchangeable
MS24463-5GInterchangeable
interchangeable cross-reference
interchangeable
5043Interchangeable
interchangeable cross-reference
interchangeable
E61-00AInterchangeable
interchangeable cross-reference
interchangeable
60020-57Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24463-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24463-3?
MS24463-3 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS24463-3?
There are 23 known substitutes for MS24463-3: BACB10CE5, 5NBE717ZP2C, MS24463-5G and 20 more. Substitute compatibility should be verified for your specific system.
Is MS24463-3 still available?
MS24463-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24463-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026