PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24462-8
MS24462-8 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.8750 INCHES NOMINAL IN, outer_ring_width: 0.7500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24462-8
NSN: 3110-00-227-2598
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter0.5000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.8750 INCHES NOMINAL IN
outer_ring_width0.7500 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN INNER RING
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter1.0000 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2598
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS24462-8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
INNER RING WIDTH: 0.8750 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
OUTER RING WIDTH: 0.7500 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER RING
INNER RING WIDTH0.8750 INCHES NOMINAL IN
SURFACE FINISHGROUND
OUTER RING WIDTH0.7500 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER1.0000 INCHES NOMINAL IN
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
857926-2Interchangeable
interchangeable cross-reference
interchangeable
15106-4-40-501Interchangeable
interchangeable cross-reference
interchangeable
5068Interchangeable
interchangeable cross-reference
interchangeable
5-2 060102BAInterchangeable
interchangeable cross-reference
interchangeable
68F05X02Interchangeable
interchangeable cross-reference
interchangeable
7079368Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24462-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24462-8?
MS24462-8 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS24462-8?
There are 17 known substitutes for MS24462-8: 857926-2, 15106-4-40-501, 5068 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24462-8?
MS24462-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24462-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026