PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24462-5
MS24462-5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.6250 INCHES NOMINAL IN, outer_ring_width: 0.5000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5620, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24462-5
NSN: 3110-00-112-5620
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3125 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.6250 INCHES NOMINAL IN
outer_ring_width0.5000 INCHES NOMINAL IN
style_designatorNON-SEPARABLE, WITH RETAINER PLATES, DRAWN SHELL
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
overall_outside_diameter0.6875 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-112-5620
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS24462-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.3125 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH RETAINER PLATES, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.6250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.3125 INCHES NOMINAL IN
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
STYLE DESIGNATORNON-SEPARABLE, WITH RETAINER PLATES, DRAWN SHELL
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
INNER RING WIDTH0.6250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
MATERIALSTEEL OVERALL
OUTER RING WIDTH0.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
AR5Interchangeable
interchangeable cross-reference
interchangeable
430309Interchangeable
interchangeable cross-reference
interchangeable
T1171NInterchangeable
interchangeable cross-reference
interchangeable
AR5ANG25Interchangeable
interchangeable cross-reference
interchangeable
SF5-6AInterchangeable
interchangeable cross-reference
interchangeable
119965-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24462-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24462-5?
MS24462-5 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS24462-5?
There are 13 known substitutes for MS24462-5: AR5, 430309, T1171N and 10 more. Substitute compatibility should be verified for your specific system.
Is MS24462-5 still available?
MS24462-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24462-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026