PartsTable
Technical Data Sheet
Download PDF

MS24400D16 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS24400D16: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.406 INCHES NOMINAL IN, thread_class: 3B, thread_direction: RIGHT-HAND, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-4112, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24400D16
NSN: 5310-00-208-4112
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
nut_styleHEXAGON
nut_height0.406 INCHES NOMINAL IN
thread_class3B
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
width_across_flats1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
bearing_surface_typeCHAMFERED
NSN5310-00-208-4112
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS24400D16 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 0.406 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 3B
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
BEARING SURFACE TYPE: CHAMFERED
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.406 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
MATERIALALUMINUM ALLOY OVERALL
BEARING SURFACE TYPECHAMFERED
SUBSTITUTES & CROSS-REFERENCES 1
2D135Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS24400D16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24400D16?
MS24400D16 is a NUT,PLAIN,HEXAGON.
What parts can replace MS24400D16?
There is 1 known substitute for MS24400D16: 2D135. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24400D16?
MS24400D16 is cataloged in the U.S. Government catalog under NSN 5310-00-208-4112. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24400D16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.