PartsTable
Technical Data Sheet
Download PDF

MS24393-8MOD — ADAPTER,STRAIGHT,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS24393-8MOD: ADAPTER,STRAIGHT,TUBE TO BOSS.

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 3A CENTER BULKHEAD A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARED (TUBE) ALL ENDS, style_designator: FLARED W/ BULKHEAD THREAD. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-800-9872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24393-8MOD
NSN: 4730-00-800-9872
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
seat_angle37.0 DEGREES ALL ENDS
thread_class3A CENTER BULKHEAD A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARED (TUBE) ALL ENDS
style_designatorFLARED W/ BULKHEAD THREAD
surface_treatmentCADMIUM OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.750 INCHES ALL ENDS IN
nominal_overall_length1.734 INCHES IN
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) CENTER BULKHEAD
NSN4730-00-800-9872
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS24393-8MOD · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CONNECTION STYLE: FLARED (TUBE) ALL ENDS
•
NOMINAL OVERALL LENGTH: 1.734 INCHES IN
•
CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS
•
STYLE DESIGNATOR: FLARED W/ BULKHEAD THREAD
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.500 INCHES SECOND END IN
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CONNECTION STYLEFLARED (TUBE) ALL ENDS
NOMINAL OVERALL LENGTH1.734 INCHES IN
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
STYLE DESIGNATORFLARED W/ BULKHEAD THREAD
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES SECOND END IN
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES FIRST END IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL THREAD SIZE0.750 INCHES ALL ENDS IN
NOMINAL THREAD SIZE0.750 INCHES CENTER BULKHEAD IN
SUBSTITUTES & CROSS-REFERENCES 3
AS5406-08MODReference document
Same NSN cross-reference
Reference document — Secondary reference
MS24393-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
4730008009872Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS24393-8MOD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24393-8MOD?
MS24393-8MOD is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace MS24393-8MOD?
There are 3 known substitutes for MS24393-8MOD: AS5406-08MOD, MS24393-8, 4730008009872. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24393-8MOD?
MS24393-8MOD is cataloged in the U.S. Government catalog under NSN 4730-00-800-9872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24393-8MOD

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.