PartsTable
Technical Data Sheet
Download PDF

MS24392K10 — ADAPTER,STRAIGHT,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS24392K10: ADAPTER,STRAIGHT,TUBE TO BOSS.

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL BOSS ALL ENDS, connection_style: FLARED W/ GASKET SEAL (BOSS) ALL ENDS, special_features: USED ON GRUMMAN AIRCRAFT,MODEL A10, style_designator: FLARED W/ CENTER WRENCHING FACILITY. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-928-3479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24392K10
NSN: 4730-00-928-3479
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL BOSS ALL ENDS
connection_styleFLARED W/ GASKET SEAL (BOSS) ALL ENDS
special_featuresUSED ON GRUMMAN AIRCRAFT,MODEL A10
style_designatorFLARED W/ CENTER WRENCHING FACILITY
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.875 INCHES ALL ENDS IN
nominal_overall_length1.828 INCHES IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-14072,E300,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
NSN4730-00-928-3479
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS24392K10 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
•
CONNECTION STYLE: FLARED W/ GASKET SEAL (BOSS) ALL ENDS
•
NOMINAL OVERALL LENGTH: 1.828 INCHES IN
•
CONNECTION TYPE: THREADED EXTERNAL BOSS ALL ENDS
•
STYLE DESIGNATOR: FLARED W/ CENTER WRENCHING FACILITY
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.875 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
CONNECTION STYLEFLARED W/ GASKET SEAL (BOSS) ALL ENDS
NOMINAL OVERALL LENGTH1.828 INCHES IN
CONNECTION TYPETHREADED EXTERNAL BOSS ALL ENDS
STYLE DESIGNATORFLARED W/ CENTER WRENCHING FACILITY
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE0.875 INCHES ALL ENDS IN
SPECIAL FEATURESUSED ON GRUMMAN AIRCRAFT,MODEL A10
SURFACE TREATMENTPASSIVATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
AS5174K1010Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AN815-10KReference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS4841Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS24392K10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24392K10?
MS24392K10 is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace MS24392K10?
There are 3 known substitutes for MS24392K10: AS5174K1010, AN815-10K, SAE-AS4841. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24392K10?
MS24392K10 is cataloged in the U.S. Government catalog under NSN 4730-00-928-3479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24392K10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.