PartsTable
Technical Data Sheet
PartsTable / MRO / MS24231-2
MS24231-2 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The MS24231-2 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, overall_width: 1.125 INCHES NOMINAL IN, overall_height: 0.427 INCHES NOMINAL IN, overall_length: 1.390 INCHES NOMINAL IN, style_designator: IRREGULAR, surface_treatment: CADMIUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-682-0885, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MS24231-2
NSN: 5999-00-682-0885
FSC: 5999
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY
overall_width1.125 INCHES NOMINAL IN
overall_height0.427 INCHES NOMINAL IN
overall_length1.390 INCHES NOMINAL IN
style_designatorIRREGULAR
surface_treatmentCADMIUM
specification/standard_data96906-MS24231 GOVERNMENT STANDARD
unthreaded_mounting_hole_diameter0.128 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
accommodated_item_securing_device_typeTWIST LOCK
distance_between_mounting_facility_centers0.905 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE
NSN5999-00-682-0885
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN MS24231-2 MFR MS24231-2
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.905 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN
•
TEST DATA DOCUMENT: 81349-MIL-S-9372 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.128 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
•
SPECIFICATION/STANDARD DATA: 96906-MS24231 GOVERNMENT STANDARD
•
MATERIAL: COPPER ALLOY
•
STYLE DESIGNATOR: IRREGULAR
•
MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
•
ACCOMMODATED ITEM SECURING DEVICE TYPE: TWIST LOCK
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE BETWEEN MOUNTING FACILITY CENTERS0.905 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN
TEST DATA DOCUMENT81349-MIL-S-9372 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER0.128 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
SPECIFICATION/STANDARD DATA96906-MS24231 GOVERNMENT STANDARD
MATERIALCOPPER ALLOY
STYLE DESIGNATORIRREGULAR
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
ACCOMMODATED ITEM SECURING DEVICE TYPETWIST LOCK
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTCADMIUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MILS9372Interchangeable
interchangeable cross-reference
interchangeable
T5-1015Interchangeable
interchangeable cross-reference
interchangeable
MS24213-1Interchangeable
interchangeable cross-reference
interchangeable
527018-3Interchangeable
interchangeable cross-reference
interchangeable
7710703P2Interchangeable
interchangeable cross-reference
interchangeable
T5-1020-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy MS24231-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24231-2?
MS24231-2 is a MS24231-2. It is classified as a MRO (MRO_GENERAL).
What parts can replace MS24231-2?
There are 23 known substitutes for MS24231-2: MILS9372, T5-1015, MS24213-1 and 20 more. Substitute compatibility should be verified for your specific system.
Is MS24231-2 still available?
MS24231-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24231-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026