PartsTable
Technical Data Sheet
PartsTable / MRO / MS24001-2
MS24001-2 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The FUSEHOLDER,BLOCK is a the manufacturer industrial component. Key specifications include material: PLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER BODY, body_style: SIDE BARRIER TYPE, overall_width: 1.594 INCHES MAXIMUM IN, base_thickness: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, overall_height: 1.016 INCHES MAXIMUM IN, overall_length: 3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5920-00-686-2587, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MS24001-2
NSN: 5920-00-686-2587
FSC: 5920
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER BODY
body_styleSIDE BARRIER TYPE
overall_width1.594 INCHES MAXIMUM IN
base_thickness0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
overall_height1.016 INCHES MAXIMUM IN
overall_length3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN
surface_treatmentCADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE TERMINAL
mounting_hole_styleDIAGONAL TO THE LEFT
mounting_hole_diameter0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
mounting_hole_quantity2
accommodated_fuse_length0.391 INCHES NOMINAL IN
terminal_type_and_quantity4 SCREW
NSN5920-00-686-2587
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available FUSEHOLDER,BLOCK TITLE COMPONENT PN MS24001-2 MFR FUSEHOLDER,BLOCK
KEY FEATURES
•
MATERIAL: PLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER BODY
•
ACCOMMODATED FUSE LENGTH: 0.391 INCHES NOMINAL IN
•
FUSE TERMINAL TYPE ACCOMMODATED: KNIFE BLADE
•
MOUNTING HOLE QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER BODY
MATERIALCOPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 CONTACT
ACCOMMODATED FUSE LENGTH0.391 INCHES NOMINAL IN
FUSE TERMINAL TYPE ACCOMMODATEDKNIFE BLADE
MOUNTING HOLE QUANTITY2
OVERALL LENGTH3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT
TEST DATA DOCUMENT81349-MIL-F-5373C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MS24000-1Interchangeable
interchangeable cross-reference
interchangeable
F1H1MInterchangeable
interchangeable cross-reference
interchangeable
SAE-AS53731Interchangeable
interchangeable cross-reference
interchangeable
MS24000-2Interchangeable
interchangeable cross-reference
interchangeable
MILF5373Interchangeable
interchangeable cross-reference
interchangeable
F1H2MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24001-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24001-2?
MS24001-2 is a FUSEHOLDER,BLOCK. It is classified as a MRO (MRO_GENERAL).
What parts can replace MS24001-2?
There are 11 known substitutes for MS24001-2: MS24000-1, F1H1M, SAE-AS53731 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24001-2?
MS24001-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5920-00-686-2587. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24001-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026