PartsTable
Technical Data Sheet
Download PDF

MS21926-4C — INJECTOR ASSEMBLY,FUEL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS21926-4C: INJECTOR ASSEMBLY,FUEL.

The INJECTOR ASSEMBLY,FUEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, flow_angle: 90.0 DEGREES, leg_length: 1.070 INCHES NOMINAL FIRST END IN, seat_angle: 12.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-618-9031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21926-4C
NSN: 4730-00-618-9031
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
flow_angle90.0 DEGREES
leg_length1.070 INCHES NOMINAL FIRST END IN
seat_angle12.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARELESS (TUBE) ALL ENDS
surface_treatmentPASSIVATE OVERALL
operating_pressure30000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.438 INCHES ALL ENDS IN
media_for_which_designedFLUID SINGLE RESPONSE
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END BULKHEAD
NSN4730-00-618-9031
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS21926-4C · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
•
CONNECTION STYLE: FLARELESS (TUBE) ALL ENDS
•
CONNECTION TYPE: THREADED EXTERNAL TUBE FIRST END BULKHEAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.250 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
CONNECTION STYLEFLARELESS (TUBE) ALL ENDS
CONNECTION TYPETHREADED EXTERNAL TUBE FIRST END BULKHEAD
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.250 INCHES ALL ENDS IN
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.250 INCHES FIRST END BULKHEAD IN
OPERATING PRESSURE30000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SUBSTITUTES & CROSS-REFERENCES 6
AS21926Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS21926D4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AS18280Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS18280Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS21926C4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS21926J4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS21926-4C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21926-4C?
MS21926-4C is a INJECTOR ASSEMBLY,FUEL.
What parts can replace MS21926-4C?
There are 6 known substitutes for MS21926-4C: AS21926, MS21926D4, AS18280 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21926-4C?
MS21926-4C is cataloged in the U.S. Government catalog under NSN 4730-00-618-9031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21926-4C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.