PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21921D4
MS21921D4 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The INJECTOR ASSEMBLY,FUEL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: TUBE COUPLING, nut_height: 0.720 INCHES NOMINAL IN, seat_angle: 45.00 DEGREES NOMINAL, thread_class: 3B, thread_series: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-222-8636, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21921D4
NSN: 4730-00-222-8636
FSC: 4730
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleTUBE COUPLING
nut_height0.720 INCHES NOMINAL IN
seat_angle45.00 DEGREES NOMINAL
thread_class3B
thread_seriesUNF
special_featuresGRUMMAN AEROSPACE CORP A10 AIRCRAFT; WEAPON SYSTEM ESSENTIAL
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
length_to_shoulder0.537 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN
width_across_flats0.562 INCHES NOMINAL IN
nominal_thread_size0.438 INCHES IN
NSN4730-00-222-8636
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS21921D4 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 7075 OVERALL
•
SEAT ANGLE: 45.00 DEGREES NOMINAL
•
NUT HEIGHT: 0.719 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 20
•
SURFACE TREATMENT: ANODIZE OVERALL
•
NOMINAL TUBE OUTSIDE DIAMETER: 0.250 INCHES IN
•
LENGTH TO SHOULDER: 0.547 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY 7075 OVERALL
SEAT ANGLE45.00 DEGREES NOMINAL
NUT HEIGHT0.719 INCHES NOMINAL IN
THREAD QUANTITY PER INCH20
SURFACE TREATMENTANODIZE OVERALL
NOMINAL TUBE OUTSIDE DIAMETER0.250 INCHES IN
LENGTH TO SHOULDER0.547 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.438 INCHES IN
NUT STYLETUBE COUPLING
SMALLEST INSIDE DIAMETER0.300 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MS21921-4Interchangeable
interchangeable cross-reference
interchangeable
4730-554-8015Interchangeable
interchangeable cross-reference
interchangeable
4730005548015Interchangeable
interchangeable cross-reference
interchangeable
AS21921-4DInterchangeable
interchangeable cross-reference
interchangeable
AS18280Interchangeable
interchangeable cross-reference
interchangeable
MS21921-4DInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21921D4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21921D4?
MS21921D4 is a INJECTOR ASSEMBLY,FUEL.
What parts can replace MS21921D4?
There are 11 known substitutes for MS21921D4: MS21921-4, 4730-554-8015, 4730005548015 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21921D4?
MS21921D4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-222-8636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21921D4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026