PartsTable
Technical Data Sheet
Download PDF

MS21921-3K — INJECTOR ASSEMBLY,FUEL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS21921-3K: INJECTOR ASSEMBLY,FUEL.

The INJECTOR ASSEMBLY,FUEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, nut_style: TUBE COUPLING, nut_height: 0.570 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN, seat_angle: 45.0 DEGREES NOMINAL, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 4730-01-078-6439, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21921-3K
NSN: 4730-01-078-6439
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
nut_styleTUBE COUPLING
nut_height0.570 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
seat_angle45.0 DEGREES NOMINAL
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
thread_directionRIGHT-HAND
length_to_shoulder0.419 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES IN
smallest_inside_diameter0.232 INCHES MINIMUM AND 0.242 INCHES MAXIMUM IN
thread_quantity_per_inch24
NSN4730-01-078-6439
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS21921-3K · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH TO SHOULDER: 0.419 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SEAT ANGLE: 45.0 DEGREES NOMINAL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.570 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH TO SHOULDER0.419 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SEAT ANGLE45.0 DEGREES NOMINAL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.570 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
NUT STYLETUBE COUPLING
THREAD CLASS3B
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4730-00-000-1895 4730-00-000-4289 4730-00-000-4445 4730-00-000-8373 4730-00-000-8897 4730-00-001-0007 4730-00-001-0008
SUBSTITUTES & CROSS-REFERENCES 3
AS18280Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS21921Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS18280Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS21921-3K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21921-3K?
MS21921-3K is a INJECTOR ASSEMBLY,FUEL.
What parts can replace MS21921-3K?
There are 3 known substitutes for MS21921-3K: AS18280, AS21921, SAE-AS18280. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21921-3K?
MS21921-3K is cataloged in the U.S. Government catalog under NSN 4730-01-078-6439. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21921-3K

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.