PartsTable
Technical Data Sheet
Download PDF

MS21921-2S — INJECTOR ASSEMBLY,FUEL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS21921-2S: INJECTOR ASSEMBLY,FUEL.

The INJECTOR ASSEMBLY,FUEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 347 OVERALL, nut_style: TUBE COUPLING, nut_height: 0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN, seat_angle: 45.0 DEGREES NOMINAL, thread_class: 3B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-825-2095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21921-2S
NSN: 4730-00-825-2095
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 347 OVERALL
nut_styleTUBE COUPLING
nut_height0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
seat_angle45.0 DEGREES NOMINAL
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
length_to_shoulder0.415 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
width_across_flats0.375 INCHES NOMINAL IN
smallest_inside_diameter0.171 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
nominal_tube_outside_diameter0.125 INCHES IN
NSN4730-00-825-2095
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS21921-2S · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH TO SHOULDER: 0.415 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
SEAT ANGLE: 45.0 DEGREES NOMINAL
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
•
NUT STYLE: TUBE COUPLING
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
LENGTH TO SHOULDER0.415 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD SERIESUNF
SEAT ANGLE45.0 DEGREES NOMINAL
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
NUT STYLETUBE COUPLING
THREAD CLASS3B
MATERIALSTEEL COMP 347 OVERALL
SMALLEST INSIDE DIAMETER0.171 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
AS21921-2RReference document
Same NSN cross-reference
Reference document — Secondary reference
AS21921-2SReference document
Same NSN cross-reference
Reference document — Secondary reference
AS18280Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS18280Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE AS21921Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21921-2S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21921-2S?
MS21921-2S is a INJECTOR ASSEMBLY,FUEL.
What parts can replace MS21921-2S?
There are 5 known substitutes for MS21921-2S: AS21921-2R, AS21921-2S, AS18280 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21921-2S?
MS21921-2S is cataloged in the U.S. Government catalog under NSN 4730-00-825-2095. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21921-2S