MS21919WDF29 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21919WDF29: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-435-7803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21919WDF29

NSN: 5340-01-435-7803
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	ALUMINUM ALLOY 2024 BAND
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	CHROMATE BAND
material_thickness	0.062 INCHES NOMINAL IN
loop_inside_diameter	1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
material_document_and_classification	AMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end	1.624 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
NSN	5340-01-435-7803

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.624 INCHES NOMINAL IN

•

SURFACE TREATMENT: CHROMATE BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.062 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.624 INCHES NOMINAL IN
SURFACE TREATMENT	CHROMATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS21919WDF29Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS21919WDF29?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21919WDF29?

MS21919WDF29 is a CLAMP,LOOP.

What parts can replace MS21919WDF29?

There are 2 known substitutes for MS21919WDF29: SAE-AS21919, AS21919WDF29. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21919WDF29?

MS21919WDF29 is cataloged in the U.S. Government catalog under NSN 5340-01-435-7803. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21919WDF29 — CLAMP,LOOP

Request a Quote — MS21919WDF29