MS21919WCJ37 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21919WCJ37: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER FLUOROSILICONE CLASS FQ CUSHION, temp_rating: 450.0 FAHRENHEIT DEGF, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-612-6462, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21919WCJ37

NSN: 5340-01-612-6462
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	RUBBER FLUOROSILICONE CLASS FQ CUSHION
temp_rating	450.0 FAHRENHEIT DEGF
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features	CUSHION IS UNAFFECTED BY OZONE BUT IS NOT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS. CUSHION SHALL BE SOLID BLUE IN COLOR. CLAMP COMES WITH A WEDGE.
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.040 INCHES NOMINAL IN
loop_inside_diameter	2.297 INCHES MINIMUM AND 2.327 INCHES MAXIMUM IN
media_for_which_gasket_is_designed	LIGHT PETROLEUM
distance_from_loop_center_to_tongue_end	1.849 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency	CLAMP, LOOP TYPE, CUSHIONED, SUPPORT
NSN	5340-01-612-6462

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: 450.0 FAHRENHEIT DEGF

•

MEDIA FOR WHICH GASKET IS DESIGNED: LIGHT PETROLEUM

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.849 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

TEMP RATING	450.0 FAHRENHEIT DEGF
MEDIA FOR WHICH GASKET IS DESIGNED	LIGHT PETROLEUM
STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.849 INCHES NOMINAL IN
SPECIAL FEATURES	CUSHION IS UNAFFECTED BY OZONE BUT IS NOT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS. CUSHION SHALL BE SOLID BLUE IN COLOR. CLAMP COMES WITH A WEDGE.
PART NAME ASSIGNED BY CONTROLLING AGENCY	CLAMP, LOOP TYPE, CUSHIONED, SUPPORT
TONGUE HOLE TYPE	ROUND, UNTHREADED

SUBSTITUTES & CROSS-REFERENCES 2

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS21919WCJ37Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MS21919WCJ37?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21919WCJ37?

MS21919WCJ37 is a CLAMP,LOOP.

What parts can replace MS21919WCJ37?

There are 2 known substitutes for MS21919WCJ37: SAE-AS21919, AS21919WCJ37. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21919WCJ37?

MS21919WCJ37 is cataloged in the U.S. Government catalog under NSN 5340-01-612-6462. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21919WCJ37 — CLAMP,LOOP

Request a Quote — MS21919WCJ37