MS21919WCJ20 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21919WCJ20: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.500 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-375-2091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21919WCJ20

NSN: 5340-00-375-2091
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL CORROSION RESISTING BAND
overall_width	0.500 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
loop_inside_diameter	1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end	1.295 INCHES MINIMUM AND 1.325 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	1.077 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN
NSN	5340-00-375-2091

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.295 INCHES MINIMUM AND 1.325 INCHES MAXIMUM IN

•

SURFACE TREATMENT: PASSIVATE BAND

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.077 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.295 INCHES MINIMUM AND 1.325 INCHES MAXIMUM IN
SURFACE TREATMENT	PASSIVATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.077 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN
MATERIAL	RUBBER CUSHION
MATERIAL	STEEL CORROSION RESISTING BAND

SUBSTITUTES & CROSS-REFERENCES 5

5340PL1524853Reference document

Same NSN cross-reference

Reference document — Informative reference only

AS21919WCJ20Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-8603Reference document

Same NSN cross-reference

Reference document — Identification reference

MIL-C-8603Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS21105-20Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MS21919WCJ20?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21919WCJ20?

MS21919WCJ20 is a CLAMP,LOOP.

What parts can replace MS21919WCJ20?

There are 5 known substitutes for MS21919WCJ20: 5340PL1524853, AS21919WCJ20, MIL-DTL-8603 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21919WCJ20?

MS21919WCJ20 is cataloged in the U.S. Government catalog under NSN 5340-00-375-2091. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21919WCJ20 — CLAMP,LOOP

Request a Quote — MS21919WCJ20