PartsTable
Technical Data Sheet
Download PDF

MS21919WCF2 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS21919WCF2: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-338-3228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21919WCF2
NSN: 5340-01-338-3228
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
cushioning_environmental_protectionFUEL RESISTANT
material_document_and_classificationAMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.645 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.442 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
NSN5340-01-338-3228
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21919WCF2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL RESISTANT
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.645 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL RESISTANT
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.645 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.442 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
AS21919WCF2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AS21919Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS21919WCF2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919WCF2?
MS21919WCF2 is a CLAMP,LOOP.
What parts can replace MS21919WCF2?
There are 2 known substitutes for MS21919WCF2: AS21919WCF2, SAE-AS21919. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21919WCF2?
MS21919WCF2 is cataloged in the U.S. Government catalog under NSN 5340-01-338-3228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21919WCF2