PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21919DG24
MS21919DG24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,MULTIPLE,FLUID PRESSUR. Key specifications include material: ALUMINUM BAND, temp_rating: 21.0 FAHRENHEIT DEGF, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: CHLOROPRENE CUSHION; COLOR SHALL BE BLACK WITH BLUE IDENTIFIER PER THE PROCUREMENT SPECIFICATION, style_designator: OFFSET MOUNT, material_diameter: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-9416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21919DG24
NSN: 5340-00-286-9416
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialALUMINUM BAND
temp_rating21.0 FAHRENHEIT DEGF
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresCHLOROPRENE CUSHION; COLOR SHALL BE BLACK WITH BLUE IDENTIFIER PER THE PROCUREMENT SPECIFICATION
style_designatorOFFSET MOUNT
material_diameter0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
specification/standard_data96906-MS21919 REV E GOVERNMENT STANDARD
cushioning_environmental_protectionFUEL RESISTANT AND OZONE RESISTANT
distance_from_loop_center_to_tongue_end1.467 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.234 INCHES MINIMUM AND 1.264 INCHES MAXIMUM IN
NSN5340-00-286-9416
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21919DG24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: -1L-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION
•
LOOP INSIDE DIAMETER: 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOROFFSET MOUNT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION-1L-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
LOOP INSIDE DIAMETER1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
SPECIAL FEATURESWEDGE TYPE CUSHION CONSTRUCTION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.234 INCHES MINIMUM AND 1.264 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.467 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
TA1716WS4Upgraded Successor
successor cross-reference
successor
MS21919WG4Upgraded Successor
successor cross-reference
successor
10335339Upgraded Successor
successor cross-reference
successor
AS21919WCG03Upgraded Successor
successor cross-reference
successor
AS21919Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21919DG24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919DG24?
MS21919DG24 is a CONNECTOR,MULTIPLE,FLUID PRESSUR.
What parts can replace MS21919DG24?
There are 20 known substitutes for MS21919DG24: MIL-DTL-8603, TA1716WS4, MS21919WG4 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21919DG24?
MS21919DG24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-9416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21919DG24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026